Service available now · 50 states Mon–Sun · 7AM–9PM EST

Wolf Oven Error Codes
Lookup & Diagnostics

All known error codes for Wolf ovens — what each code means, self-check steps, and when to call an experienced technician.

97 Error codes
93 Service areas
139 Models covered

Schedule Wolf
appliance repair

Experienced technicians in all 50 US states. Average response within 24 hours.

  • Experienced Wolf specialists
  • Genuine OEM parts
  • 30-day labor warranty
  • Upfront pricing

Wolf oven error codes.

0021
Upper bake relay shorted on a Wolf M-Series wall oven.
Oven →
01
Door-lock malfunction on a Wolf range — the oven lock was not sensed in time.
Range →
02
Over-temperature shutdown on a Wolf range oven — the cavity ran too hot.
Range →
03
Open RTD oven sensor on a Wolf range — the temperature sensor circuit is open.
Range →
04
Shorted RTD oven sensor on a Wolf range — near-zero sensor resistance.
Range →
0821
Motorized door-lock (MDL) relay shorted on a Wolf M-Series wall oven.
Oven →
0E
Power relay shorted or stuck on a Wolf range oven control.
Range →
22
Stuck key on a Wolf CE electric radiant cooktop.
Cooktop →
3
Liquid or cookware on the controls of a Wolf CI induction cooktop.
Cooktop →
3031
Food probe shorted on a Wolf M-Series wall oven (on-screen "Probe Shorted").
Oven →
3121
Oven RTD sensor shorted on a Wolf M-Series wall oven.
Oven →
3221
Oven RTD sensor open on a Wolf M-Series wall oven.
Oven →
39
Controller options problem on a Wolf CE electric radiant cooktop.
Cooktop →
4421
Cooling fan not detected on a Wolf M-Series wall oven.
Oven →
4531
Convection fan not detected on a Wolf M-Series wall oven.
Oven →
47
LIN communication problem on a Wolf CE electric radiant cooktop.
Cooktop →
5021
Over-temperature during self-clean (>950°F) on a Wolf M-Series wall oven.
Oven →
8010
Display failure on a Wolf M-Series wall oven touchscreen.
Oven →
9010
Touch-sensor failure on a Wolf M-Series wall oven ("Touch Pad Sensor failure").
Oven →
Blower Won’t Run
A Wolf range hood blower will not run on any speed.
Range Hood →
Blown Monitor Fuse
A Wolf microwave is dead from a blown monitor fuse — a door-interlock safety issue.
Microwave →
Brownout
Brownout / low-voltage error on a Wolf E-Series wall oven.
Oven →
Burner Won’t Ignite
A Wolf SRT rangetop burner clicks or does nothing but will not light.
Range Top →
COMM ERR
Communication lost with the oven controller on a Wolf range.
Range →
Communications Error
UIM/RM communication failure between boards on a Wolf E-Series wall oven.
Oven →
Continuous Clicking
A Wolf gas range keeps clicking, sometimes on every burner, even after lighting.
Range →
Continuous Clicking
A Wolf SRT rangetop keeps clicking — often all burners at once.
Range Top →
Convection Fan Failure
The convection fan on a Wolf range oven is silent, noisy, or not circulating heat.
Range →
COOL FAN
Cooling-fan failure on a Wolf range — the control electronics may overheat.
Range →
Door Won’t Unlock
A Wolf wall oven door stays locked after a self-clean cycle.
Oven →
Downdraft Won’t Raise
A Wolf downdraft (DD) ventilation unit will not raise or lower.
Range Hood →
Drawer Won’t Close
A Wolf microwave drawer (MD) will not close or seal fully.
Microwave →
Drawer Won’t Open
A Wolf microwave drawer (MD) will not open when the button is pressed.
Microwave →
E01
Ambient temperature too high on a legacy Wolf CT electric cooktop.
Cooktop →
E02
Heatsink temperature high on a legacy Wolf CT electric cooktop.
Cooktop →
E05
Open ambient thermistor on a legacy Wolf CT electric cooktop.
Cooktop →
E07
Model/configuration value changed on a legacy Wolf CT electric cooktop.
Cooktop →
E08
Keyboard communication problem on a legacy Wolf CT electric cooktop.
Cooktop →
E09
PT temperature-sensor short on a Wolf CSO convection steam oven.
Oven →
E09
Keyboard communication problem on a legacy Wolf CT electric cooktop.
Cooktop →
E1
Ambient temperature too high on a legacy Wolf CT induction cooktop.
Cooktop →
E10
Generator communication problem on a legacy Wolf CT induction cooktop.
Cooktop →
E17 / F1
Food-probe short on a Wolf CSO convection steam oven (shown as E17/F1).
Oven →
E18
Food-probe resistance too high on a Wolf CSO convection steam oven.
Oven →
E18
Power-board failure on a legacy Wolf CT electric cooktop.
Cooktop →
E22
Stuck key on a Wolf CI induction cooktop touch control.
Cooktop →
E29 / F9
Steam chamber not sealed on a Wolf CSO convection steam oven (E29/F9).
Oven →
E3
Heatsink temperature high on a legacy Wolf CT induction cooktop.
Cooktop →
E31
Burner ON-LED failure on a legacy Wolf CT induction cooktop.
Cooktop →
E4
Configuration implausible on a Wolf CI induction cooktop.
Cooktop →
E4
Heatsink temperature high on a legacy Wolf CT induction cooktop.
Cooktop →
E41
Temperature sensor shorted on a legacy Wolf CT induction cooktop.
Cooktop →
E43
Induction generator failure on a legacy Wolf CT induction cooktop.
Cooktop →
E47
LIN communication problem on a Wolf CI induction cooktop.
Cooktop →
E5
Relay failure on a Wolf CE electric radiant cooktop.
Cooktop →
E53
Shorted thermistor on a legacy Wolf CT induction cooktop.
Cooktop →
E6
Power-supply problem, or no/wrong pan, on a Wolf CI induction cooktop.
Cooktop →
E6
Power-supply problem on a Wolf CE electric radiant cooktop.
Cooktop →
E8
Cooling-fan error on a Wolf CI induction cooktop.
Cooktop →
E8
Cooling-fan error on a Wolf CE electric radiant cooktop.
Cooktop →
E8
Generator communication problem on a legacy Wolf CT induction cooktop.
Cooktop →
E9
Generator communication problem on a legacy Wolf CT induction cooktop.
Cooktop →
EA
Controller problem on a Wolf CI induction cooktop.
Cooktop →
EA
Controller problem on a Wolf CE electric radiant cooktop.
Cooktop →
F1
Door-lock failure on a Wolf E-Series wall oven — common after a self-clean.
Oven →
F4 / E87
Steam generator / temperature-sensor failure on a Wolf CSO steam oven (F4/E87).
Oven →
Fan Noise
A Wolf range hood is rattling, humming, or noisy when running.
Range Hood →
FC Filter Reminder
FC on a Wolf V-Series range hood is a recirculating-filter reminder, not a problem.
Range Hood →
FG Filter Reminder
FG on a Wolf V-Series range hood is a clean-filters reminder, not a problem.
Range Hood →
FUSES WRONG
Controller configuration incorrect on a Wolf range — the control is mis-set for the model.
Range →
Gas Burner Won’t Ignite
A Wolf gas range surface burner clicks or does nothing but will not light.
Range →
Gas Clicks Won’t Ignite
A Wolf CG gas cooktop burner keeps clicking but will not light.
Cooktop →
Gas Smell When Off
A Wolf SRT rangetop smells of gas with the burners turned off — a safety issue.
Range Top →
Keypad Error
Keypad / membrane circuit error on a Wolf E-Series wall oven.
Oven →
Knob Stuck
A Wolf SRT rangetop control knob is stiff, stuck, or hard to turn.
Range Top →
Lights Out
The lights on a Wolf range hood do not come on.
Range Hood →
LOWER RELAY
Lower-oven relay feedback failure on a Wolf double range.
Range →
No Bake Element Detect
No bake element detected on a Wolf E-Series wall oven.
Oven →
No Cooling Fan Detect
Cooling fan not detected on a Wolf E-Series wall oven.
Oven →
No Power
A Wolf microwave is dead — no display and no response.
Microwave →
Oven Won’t Heat
A Wolf range oven runs but never gets hot, or heats far below the set point.
Range →
Oven Won’t Heat
A Wolf wall oven powers on but never gets hot or heats far below the set point.
Oven →
Over Temp
Over-temperature shutdown on a Wolf E-Series wall oven.
Oven →
Pan Not Detected
A Wolf induction cooktop zone will not detect the pan and will not heat.
Cooktop →
PF
Power failure or oven-too-hot-for-mode condition on a Wolf range.
Range →
Relay Open
A heating relay reads open (stuck off) on a Wolf E-Series wall oven.
Oven →
Relay Shorted
A heating relay reads shorted (stuck closed) on a Wolf E-Series wall oven.
Oven →
RTD Open
Open oven temperature sensor on a Wolf E-Series wall oven.
Oven →
RTD Shorted
Shorted oven temperature sensor on a Wolf E-Series wall oven.
Oven →
Single Burner No Spark
One Wolf SRT rangetop burner has no spark while the others ignite.
Range Top →
Temp Probe Short
Meat/temperature probe shorted on a Wolf E-Series wall oven.
Oven →
Touchpad Unresponsive
A Wolf microwave touchpad does not respond to presses.
Microwave →
U400
Over-voltage shutdown on a Wolf CE electric radiant cooktop.
Cooktop →
Weak Flame
A Wolf SRT rangetop burner lights but the flame is weak or simmers poorly.
Range Top →
Weak Suction
A Wolf range hood runs but pulls smoke and steam weakly.
Range Hood →
Won’t Heat
A Wolf microwave runs but does not heat — check Demo/Showroom mode first.
Microwave →
Won’t Self-Clean
A Wolf wall oven will not start or finish a self-clean cycle.
Oven →
Wolf oven error codes (E Series, M Series, CSO)

How a Wolf wall oven reports a fault

Wolf built-in wall ovens are the most code-rich Wolf appliances, and they use three non-overlapping schemes — one per series. The legacy E Series reports text phrases plus a single numeric door-lock code; the current M Series reports four-digit numeric codes with on-screen messages; and the CSO Convection Steam oven reports paired codes. The schemes must never be mixed, so the first step in any Wolf oven repair is identifying which series you own from the model suffix.

E Series codes

The E Series shows the door-lock failure as F1 — common after a self-clean cycle — and reports everything else in plain text: “RTD Open” or “RTD Shorted” for the temperature sensor, “Temp Probe Short” for the meat probe, “Over Temp”, “Brownout error”, “No Bake/Broil/Conv element detect”, “No Convect/Cooling Fan detect”, and keypad or communication errors. A probe readout of “998” means partially inserted and “0” means not inserted — neither is an error.

M Series codes

The M Series uses four-digit numeric codes where the first digit groups the fault: 0021/0022 a shorted upper/lower bake relay, 0821/0822 a shorted lock relay, 3031/3032 a shorted probe, 3121–3222 the RTD shorted or open, 4421/4422 a cooling fan not detected, 4531/4631 a convection fan not detected, and 5021/5121 over-temperature in clean and non-clean modes. The touchscreen also shows plain messages such as “Touch Pad Sensor Fault” and a flashing PROBE.

CSO steam codes, and when to call

The CSO Convection Steam oven uses paired codes: E17/F1 a food-probe short, E18 high probe resistance, E29/F9 the chamber not sealed, F4/E87 a steam-generator or temp-sensor fault, and E09 a PT sensor short. Across all three series, a one-off door-lock code after self-clean often clears with a full cool-down and a breaker reset; a recurring lock fault, an RTD or probe fault, a fan-not-detected code, an over-temperature trip or a steam-generator fault needs an experienced technician with the correct part. See the oven error codes page or the error codes library, then book oven repair. Confirm your model on the manufacturer’s site at subzero-wolf.com.

C — Need help?

Can't resolve your
error code?

Book an experienced Wolf technician. On-site diagnostics, genuine parts, 30-day labor warranty.