Service available now · 50 states Mon–Sun · 7AM–9PM EST

Wolf Cooktop Error Codes
Lookup & Diagnostics

All known error codes for Wolf cooktops — what each code means, self-check steps, and when to call an experienced technician.

97 Error codes
93 Service areas
139 Models covered

Schedule Wolf
appliance repair

Experienced technicians in all 50 US states. Average response within 24 hours.

  • Experienced Wolf specialists
  • Genuine OEM parts
  • 30-day labor warranty
  • Upfront pricing

Wolf cooktop error codes.

0021
Upper bake relay shorted on a Wolf M-Series wall oven.
Oven →
01
Door-lock malfunction on a Wolf range — the oven lock was not sensed in time.
Range →
02
Over-temperature shutdown on a Wolf range oven — the cavity ran too hot.
Range →
03
Open RTD oven sensor on a Wolf range — the temperature sensor circuit is open.
Range →
04
Shorted RTD oven sensor on a Wolf range — near-zero sensor resistance.
Range →
0821
Motorized door-lock (MDL) relay shorted on a Wolf M-Series wall oven.
Oven →
0E
Power relay shorted or stuck on a Wolf range oven control.
Range →
22
Stuck key on a Wolf CE electric radiant cooktop.
Cooktop →
3
Liquid or cookware on the controls of a Wolf CI induction cooktop.
Cooktop →
3031
Food probe shorted on a Wolf M-Series wall oven (on-screen "Probe Shorted").
Oven →
3121
Oven RTD sensor shorted on a Wolf M-Series wall oven.
Oven →
3221
Oven RTD sensor open on a Wolf M-Series wall oven.
Oven →
39
Controller options problem on a Wolf CE electric radiant cooktop.
Cooktop →
4421
Cooling fan not detected on a Wolf M-Series wall oven.
Oven →
4531
Convection fan not detected on a Wolf M-Series wall oven.
Oven →
47
LIN communication problem on a Wolf CE electric radiant cooktop.
Cooktop →
5021
Over-temperature during self-clean (>950°F) on a Wolf M-Series wall oven.
Oven →
8010
Display failure on a Wolf M-Series wall oven touchscreen.
Oven →
9010
Touch-sensor failure on a Wolf M-Series wall oven ("Touch Pad Sensor failure").
Oven →
Blower Won’t Run
A Wolf range hood blower will not run on any speed.
Range Hood →
Blown Monitor Fuse
A Wolf microwave is dead from a blown monitor fuse — a door-interlock safety issue.
Microwave →
Brownout
Brownout / low-voltage error on a Wolf E-Series wall oven.
Oven →
Burner Won’t Ignite
A Wolf SRT rangetop burner clicks or does nothing but will not light.
Range Top →
COMM ERR
Communication lost with the oven controller on a Wolf range.
Range →
Communications Error
UIM/RM communication failure between boards on a Wolf E-Series wall oven.
Oven →
Continuous Clicking
A Wolf gas range keeps clicking, sometimes on every burner, even after lighting.
Range →
Continuous Clicking
A Wolf SRT rangetop keeps clicking — often all burners at once.
Range Top →
Convection Fan Failure
The convection fan on a Wolf range oven is silent, noisy, or not circulating heat.
Range →
COOL FAN
Cooling-fan failure on a Wolf range — the control electronics may overheat.
Range →
Door Won’t Unlock
A Wolf wall oven door stays locked after a self-clean cycle.
Oven →
Downdraft Won’t Raise
A Wolf downdraft (DD) ventilation unit will not raise or lower.
Range Hood →
Drawer Won’t Close
A Wolf microwave drawer (MD) will not close or seal fully.
Microwave →
Drawer Won’t Open
A Wolf microwave drawer (MD) will not open when the button is pressed.
Microwave →
E01
Ambient temperature too high on a legacy Wolf CT electric cooktop.
Cooktop →
E02
Heatsink temperature high on a legacy Wolf CT electric cooktop.
Cooktop →
E05
Open ambient thermistor on a legacy Wolf CT electric cooktop.
Cooktop →
E07
Model/configuration value changed on a legacy Wolf CT electric cooktop.
Cooktop →
E08
Keyboard communication problem on a legacy Wolf CT electric cooktop.
Cooktop →
E09
PT temperature-sensor short on a Wolf CSO convection steam oven.
Oven →
E09
Keyboard communication problem on a legacy Wolf CT electric cooktop.
Cooktop →
E1
Ambient temperature too high on a legacy Wolf CT induction cooktop.
Cooktop →
E10
Generator communication problem on a legacy Wolf CT induction cooktop.
Cooktop →
E17 / F1
Food-probe short on a Wolf CSO convection steam oven (shown as E17/F1).
Oven →
E18
Food-probe resistance too high on a Wolf CSO convection steam oven.
Oven →
E18
Power-board failure on a legacy Wolf CT electric cooktop.
Cooktop →
E22
Stuck key on a Wolf CI induction cooktop touch control.
Cooktop →
E29 / F9
Steam chamber not sealed on a Wolf CSO convection steam oven (E29/F9).
Oven →
E3
Heatsink temperature high on a legacy Wolf CT induction cooktop.
Cooktop →
E31
Burner ON-LED failure on a legacy Wolf CT induction cooktop.
Cooktop →
E4
Configuration implausible on a Wolf CI induction cooktop.
Cooktop →
E4
Heatsink temperature high on a legacy Wolf CT induction cooktop.
Cooktop →
E41
Temperature sensor shorted on a legacy Wolf CT induction cooktop.
Cooktop →
E43
Induction generator failure on a legacy Wolf CT induction cooktop.
Cooktop →
E47
LIN communication problem on a Wolf CI induction cooktop.
Cooktop →
E5
Relay failure on a Wolf CE electric radiant cooktop.
Cooktop →
E53
Shorted thermistor on a legacy Wolf CT induction cooktop.
Cooktop →
E6
Power-supply problem, or no/wrong pan, on a Wolf CI induction cooktop.
Cooktop →
E6
Power-supply problem on a Wolf CE electric radiant cooktop.
Cooktop →
E8
Cooling-fan error on a Wolf CI induction cooktop.
Cooktop →
E8
Cooling-fan error on a Wolf CE electric radiant cooktop.
Cooktop →
E8
Generator communication problem on a legacy Wolf CT induction cooktop.
Cooktop →
E9
Generator communication problem on a legacy Wolf CT induction cooktop.
Cooktop →
EA
Controller problem on a Wolf CI induction cooktop.
Cooktop →
EA
Controller problem on a Wolf CE electric radiant cooktop.
Cooktop →
F1
Door-lock failure on a Wolf E-Series wall oven — common after a self-clean.
Oven →
F4 / E87
Steam generator / temperature-sensor failure on a Wolf CSO steam oven (F4/E87).
Oven →
Fan Noise
A Wolf range hood is rattling, humming, or noisy when running.
Range Hood →
FC Filter Reminder
FC on a Wolf V-Series range hood is a recirculating-filter reminder, not a problem.
Range Hood →
FG Filter Reminder
FG on a Wolf V-Series range hood is a clean-filters reminder, not a problem.
Range Hood →
FUSES WRONG
Controller configuration incorrect on a Wolf range — the control is mis-set for the model.
Range →
Gas Burner Won’t Ignite
A Wolf gas range surface burner clicks or does nothing but will not light.
Range →
Gas Clicks Won’t Ignite
A Wolf CG gas cooktop burner keeps clicking but will not light.
Cooktop →
Gas Smell When Off
A Wolf SRT rangetop smells of gas with the burners turned off — a safety issue.
Range Top →
Keypad Error
Keypad / membrane circuit error on a Wolf E-Series wall oven.
Oven →
Knob Stuck
A Wolf SRT rangetop control knob is stiff, stuck, or hard to turn.
Range Top →
Lights Out
The lights on a Wolf range hood do not come on.
Range Hood →
LOWER RELAY
Lower-oven relay feedback failure on a Wolf double range.
Range →
No Bake Element Detect
No bake element detected on a Wolf E-Series wall oven.
Oven →
No Cooling Fan Detect
Cooling fan not detected on a Wolf E-Series wall oven.
Oven →
No Power
A Wolf microwave is dead — no display and no response.
Microwave →
Oven Won’t Heat
A Wolf range oven runs but never gets hot, or heats far below the set point.
Range →
Oven Won’t Heat
A Wolf wall oven powers on but never gets hot or heats far below the set point.
Oven →
Over Temp
Over-temperature shutdown on a Wolf E-Series wall oven.
Oven →
Pan Not Detected
A Wolf induction cooktop zone will not detect the pan and will not heat.
Cooktop →
PF
Power failure or oven-too-hot-for-mode condition on a Wolf range.
Range →
Relay Open
A heating relay reads open (stuck off) on a Wolf E-Series wall oven.
Oven →
Relay Shorted
A heating relay reads shorted (stuck closed) on a Wolf E-Series wall oven.
Oven →
RTD Open
Open oven temperature sensor on a Wolf E-Series wall oven.
Oven →
RTD Shorted
Shorted oven temperature sensor on a Wolf E-Series wall oven.
Oven →
Single Burner No Spark
One Wolf SRT rangetop burner has no spark while the others ignite.
Range Top →
Temp Probe Short
Meat/temperature probe shorted on a Wolf E-Series wall oven.
Oven →
Touchpad Unresponsive
A Wolf microwave touchpad does not respond to presses.
Microwave →
U400
Over-voltage shutdown on a Wolf CE electric radiant cooktop.
Cooktop →
Weak Flame
A Wolf SRT rangetop burner lights but the flame is weak or simmers poorly.
Range Top →
Weak Suction
A Wolf range hood runs but pulls smoke and steam weakly.
Range Hood →
Won’t Heat
A Wolf microwave runs but does not heat — check Demo/Showroom mode first.
Microwave →
Won’t Self-Clean
A Wolf wall oven will not start or finish a self-clean cycle.
Oven →
Wolf cooktop error codes (induction CI, electric CE)

How a Wolf cooktop reports a fault

A Wolf cooktop is read three ways depending on its technology. Induction (CI) and electric-radiant (CE) surfaces surface a thin set of stored numeric codes, so a power or sensor fault shows a code. Sealed-gas (CG) cooktops and legacy CT gas builds have no display and are diagnosed by symptom, like any Wolf gas burner. The first thing a technician confirms is which technology you own, because the parts and the diagnostics are entirely different.

Induction (CI) codes

On a Wolf induction cooktop, 3 means liquid or cookware sitting over the controls (wipe and clear it); E4 is an implausible configuration; E6 (also shown as 6) is an electrical or power-supply issue and is also Wolf’s no/wrong-pan signal — use flat, magnetic cookware; E8 is a fan error; E22 is a stuck key; and E47 (or 47) is a LIN communication fault. Codes such as 20, E7 and E9 are reset-only states rather than hardware faults.

Electric-radiant (CE) and legacy CT codes

On a Wolf electric-radiant cooktop, 22 is a stuck key, 39 a controller-options fault, 47 a LIN communication fault, E5 a relay fault, E6 a power-supply fault, E8 a fan error, EA a controller fault and U400 an over-voltage condition. The legacy framed CT series uses its own numbering — CT induction codes such as E1, E3/E4 and E31, and CT electric codes such as E01, E02 and E18 — while a CT gas unit is read by symptom.

The gas side, and when to call

A Wolf sealed-gas (CG) cooktop has no code. A burner that clicks without igniting usually has a dirty igniter or clogged ports, moisture, or an oversized pan; a dead burner with the others working points at that burner’s igniter or switch. For the induction and electric codes, a reset-only state often clears with a breaker power-cycle; a persistent fan, relay, power-supply or LIN-communication code, or a cracked glass top, needs an experienced technician with the correct part. See the cooktop error codes page or the error codes library, then book cooktop repair. Confirm your model on the manufacturer’s site at subzero-wolf.com.

C — Need help?

Can't resolve your
error code?

Book an experienced Wolf technician. On-site diagnostics, genuine parts, 30-day labor warranty.